Double Glazed Window Repairs

If your double-glazed windows are misting up it could indicate a problem with the seals between the glass panes. This can affect the thermal performance of your home and needs to be fixed in the earliest time possible.

If your double glazing is difficult to open or is sagging, you can try lubricating the mechanisms, hinges and handles to see if it can help. But, it is better to call in an expert to ensure it is fixed properly.

Broken Panes

Cracks and chips on your window’s glass can be a hassle, but they do not have to be permanent. With a bit of patience and a few basic tools you probably already have in your home, you can fix damaged windows.

If the break is large or the window is older wooden frame, it’s better to leave the job to a professional. If the window is double-paned, it could be difficult to find a replacement exactly the same size as the old one.

The first step in replacing windows is to remove the old one from the sash. Wear safety glasses and tape the window sash in a cross-hatch style with duct tape. This will prevent glass shards from falling off while you work. Tap the sash with a paint scraper with an elongated tip or hammer to loosen up the putty. If your window has wooden mouldings to hold the pane in place, you can carefully pry the moldings off with an abrasive bar if it is framed with wood.

After the window has been taken out, clean and prep the area for a new window. Clean any remnants of sash and putty, and then use a wire brush to smooth the grooved channel into which the window is placed. Apply a little heat using a heat gun to melt the old putty and make it easier to scrape and remove.

Measure the width and length of the opening in the sash and subtract 1/16 inch from each measurement. This will ensure that the replacement pane is slightly bigger than the opening, so that it can expand and contract with temperature changes. Roll a glazier’s compound putty around the perimeter of the new pane, then press it firmly into the grooved channels within the frame. Put a glazier’s point at each corner of the pane, and approximately 6 inches apart on the frame.

If a double- or triple-paned window is broken it will let cold or hot air to escape your home, and that can cause the HVAC system to work harder to maintain an ideal indoor temperature. The gas filled windows also help improve efficiency in energy use In the event that they’re damaged, your home won’t be as well insulated.

Draughts

Double glazing is designed to be strong sturdy, secure and durable, but it can still have issues as a result of wear and tear. One of the most common problems is draughts, which can be very annoying and costly to address. Draughts result from the gap between the window frame and the wall or between the window sash frame. This gap allows for cold air to enter the house and warm air escapes, resulting in higher energy bills.

There are many ways to repair drafty windows. One method is to use mortite caulk, also known as temporary caulking. These products can be bought in tubes or rolls and then sprayed on the gaps. They can then be painted to match the existing window, making them almost undetectable. Another option is to buy an draught-proofing kit. It usually includes plastic sheeting that you affix to the window using tape and then heat with a hairdryer, sealing the gaps to keep cold air out.

You can also stop draughts by changing the locks on your windows or enhancing the hinges on your uPVC windows. Slide a card between the frame of your sash and the hinges to see whether they’re damaged. If you can move the card with ease it is possible that your hinges require replacement.

You can buy draught-proofing stripping to fit around the frame of a tilt-and turn or casement window. These are available in metal, foam or plastic. Some of them have a self-adhesive backing while others require to be pinned into place. For windows with sash, you can get brush strips like those used on front doors, and fit inside the gap to block out drafts.

You should get your double-glazed windows fixed as soon as possible when you spot any issues. If left unattended they can cause more damage and reduce efficiency. Utilizing the search function on this website will help you find a local tradesperson who can carry out double glazed window repairs quickly and effectively. Our traders have all been checked and vetted so you can be assured that you’ll receive top-quality service.

Smudging

Double-glazed windows at the office or at home is a great method to keep cold air out in the winter months and hot air out in summer. They also provide a great soundproofing barrier, which helps to block out the sound of the outside world. As with all products however, they’ll become worn out and need some maintenance. The good aspect is that a double glazed window can usually be repaired, rather than replacing it.

One of the most popular repair jobs for double-glazed windows is fixing the sash cords which hold balancing weights that allow you to open and close your window. window glaziers near me of repairing damaged sash cords will vary depending on the size and complexity of your window. You can expect to spend about $200 on this service.

Moisture that is trapped between windows’ panes is the most common cause of fogging. To solve this issue, a technician will usually need to drill through the window, then apply a chemical to remove the moisture, and then clear the window. This process costs about $150 on average, and may cost more if the window frame is rotting.

Another option to repair a double glazed window is by defogging the glass from the inside out. This is a cheaper option than replacing the IGUs but it will not return the R-value of windows back to the original value.

Smudging has been a ritual in many cultures to cleanse places of negative energy and encourage positive energy. Smudging with sage and other herbs can eliminate germs, mold spores and pollen, improving asthma symptoms and allergies. It can also be used to clear objects, like antiques or furniture pieces, of any remaining smells or energies that could have been introduced into the space by previous owners. It is recommended to clean the house every four years and every time you notice negative energy to be hanging around.

Replacement

Over time, double-glazed windows (or sealed units as they are also called) can fail and fail, particularly the air tight seal that keeps the inert Argon gas inside and prevents condensation between the glass panes. In this situation it is possible for the unit to be replaced. It is not as hard as it may seem. A competent DIYer can put in a top-quality unit in a short time.

The first step is to take off any molding that is around the window frame and pry away any glazing points keeping the existing unit in place, using a putty knife or utility knife. Once the glazing points are removed, the installer is able to cut and slice the sealant that is securing the unit. This is usually performed using a bladed instrument like a jigsaw, or knife. After the old IGU is removed, the new glass can be put into the frame, and the gap sealed with silicone sealant.

After the silicone has been applied to the gaps, a small amount of paint can be applied to cover any areas of silicone, thereby leaving the replacement windows looking brand new. The handles that have been fitted are now reattached to the frame. A final inspection is conducted to ensure that everything is in order before the FENSA registered installer leaves your home.

Our glaziers are also capable of installing replacement windows in order to upgrade your current property. These windows can be filled with argon gas, and are fitted with thermal spacer bars. These advancements can help dramatically reduce heating bills in the winter, and to keep your home at a comfortable temperature all year round.

If your double-glazed windows show signs of wear, you should consider contacting us immediately to make arrangements for a repair or a replacement. This will not only improve the appearance of your house but can also increase its value when you decide to sell it.