Sliding Patio Doors Repair

Patio doors that slide open are a great way to enjoy your outdoor space, but they can become difficult to open or close. This could be due to a number of issues, such as dirty tracks or misaligned rollers.

Start by cleaning and lubricating your rollers. You can also make use of the adjustment holes at the lower part of the movable panel to re-align your rollers.

Track that is damaged or dirty

A sliding door that does not slide as it should can result from an unclean or damaged track. Over time, dirt, grit, and even rust could build up and block the track from being able to slide smoothly. A mild detergent and a brush will do the trick. It is recommended to complete this task regularly to ensure the smooth operation of your door and avoid the need for expensive repairs down the road.

A leaking door can also be a common issue. It requires immediate attention in order to prevent structural damage, water damage and mold growth. Often the problem stems from damaged weather stripping or doors that are not aligned properly, which can be fixed by replacing old weather strips and by aligning the door.

Rollers that bounce off the track are a frequent issue that can be repaired with a simple DIY work. Recruit a friend to help you with this task as the door could be heavy. Stand inside the house, and then lean a panel towards you to shift the rollers. To prevent the panel from falling, set it on sawhorses when it’s been removed from the bottom track. Then, loosen the screws that hold each roller in place, and pry them out with the help of a screwdriver. Now you can remove any dirt that is stuck between the tracks and the wheel. You can then clean each wheel using denatured alcohol as well as the rag, then move the wheels and reconnect them to their tracks.

It’s possible to straighten bent track sections with a mallet made of rubber and a piece of wood. If the bent portion is near hinges or is likely to cause more damage, you should seek out an expert.

Rollers that are misaligned

If your sliding door isn’t sliding as smoothly it’s because the roller wheels are not aligned with the track. The wheels could be dirty, rusted or their bearings have worn out. This causes friction between the bottom of the door and the track, causing it to grind or snag when it’s shut or opened. This can also result in the sound of squeaking.

Fortunately, this is an easy fix. The wheels are attached to a bracket which can be adjusted, so you don’t have to remove the door. Utilize a screwdriver to locate the adjustment holes on the frame (usually either side). Turn the screws to control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise movement lowers it. Continue to adjust patio doors repairs near me until it opens and closes smoothly.

It is essential to adjust the wheel prior to making adjustments to your latch. In order for the lock to function correctly, the latch hooks must be aligned with the strike plate. If you don’t, the latch could accidentally open or close when you’re away from the room.

Sliding patio door are an investment. Making sure they are in good working order will ensure your family’s safety. By addressing common problems like broken tracks, rollers and handles, you can prevent costly repairs in the future. Contact our team for more information about patio doors. We can help keep your sliding patio doors in great condition by assessing the repairs needed. Our professionals can also help with any replacement parts that you may need.

The door frame is loose or damaged

Sliding patio doors are a great addition to any home. They offer a convenient and attractive alternative to swing-open or hinged doors for patios. Like all hardware items sliding patio doors are prone to develop problems with time. Fortunately, most of these issues are simple to fix using a bit of DIY know-how.

A common issue that affects sliding patio doors is gaps in the frame. This can be caused by a number factors, including misaligned rollers or track or a damaged door track, or a bent door frame. In the majority of cases, the cause of this problem can be easily fixed by removal of the door and reconnecting the track or rolling elements. It is essential to be very careful not to cause damage to the frame or track.

In some cases, it may be necessary to replace the entire track. This can be easily accomplished using a universal replacement kit which is available at all major hardware stores. These kits are simple to install and will get your door functioning properly again in no time.

Check your sliding door hardware and frame for signs of wear, like loose bolts or screws. This is a straightforward and efficient DIY patio maintenance procedure that can be accomplished with an electric screwdriver. In addition, it is essential to lubricate your rollers and tracks to ensure smooth operation and to prevent premature wear.

Patio doors are typically the primary entry point to the backyard and outdoor living space for a lot of homeowners. In order to maintain comfort and security in the home, it’s important that they function correctly. By taking the time to implement these easy DIY maintenance steps, homeowners can prolong the life span of their sliding patio doors, and avoid expensive repairs or replacements.

Handle is not working properly

Sliding patio door are an excellent way to enter your home and gain access to your backyard, but they can become difficult to operate when they are misaligned. A defective handle could cause the door to get stuck or be difficult to open and close. The good news is that fixing loose handles is a simple task that can be accomplished at home.

In most cases the reason for a loose grip is a result of screws that have fallen out of the backplate. To remedy the issue tighten the screws on the inside handle with the help of a screwdriver. If the handle remains loose, it could be a sign that the threads are worn out and require replacement.

Alternatively, a broken latch might be the culprit. It is more likely the latch will break if made of metal, instead of plastic. If the latch isn’t catching or turning, you should try oiling it first to see if this aids. If not, you may need to replace the lock entirely.

If the handle is cracked or broken, it can be difficult to operate. If this happens, you will need to replace the handle with one that matches the style and design of your patio doors.

Whether patio door repairs are old and dated or new and brand new, Feldco can help you get them back on the right track. We have doors of high-quality in a variety of sizes and styles that can be fitted to fit your home perfectly. To find out more about our doors, contact us now! We provide services to Southern California homeowners, including Ventura County and Orange County.

Faulty weatherstripping

It’s time to replace your weather stripping if see light in the doors and windows, or feel a draft pulling at the door or window. The strips form an airtight seal, which stops unwanted air, pests and water from entering the home. It also keeps your heated and conditioned air in, saving you energy costs all year round.

It could have lost its strong, bouncy seal due to aging. It is easy to determine this by using a dollar bill and putting it under the seal on top of the door frame and below the jamb of the door where the two overlap. If the dollar bill slides easily between the seal and the door is the time to replace the weather stripping.

If you replace only the worn-out portion of weather stripping, it could cause problems in the future with the seal. It’s far more effective to replace the entire stripping so that you can be confident knowing your door is properly sealed once again.

For a simple DIY project take a look at our weather stripping project guide to take off the old weather stripping and then apply the right material to your sliding patio door and frame to create a durable solid, secure seal. This is a great method for you to save money on your energy bills and fix your sliding patio door. Don’t wait until its too late. You’ll save money and improve the look of your home.